DIRECT APPROACH plug-ins 2018.8 CE Bundle-V.R

DA Bundle 2019.6 CE-V.R

Team V.R | 18 June 2019 | 8 MB

LimitX™ – Unique limiting, intelligently prevents “overs”, while being totally transparent! Plus, read/write of dynamics automation!

The plugin that started it all! It was during the development of LimitX™ that we discovered the basis for NLSRT™ which provides the adjustment to peak signals proportional to their level, resulting in transparent limiting with retention of high frequency content. While many limiters will give a waveform that looks like a lawn mower clipped off the top of each waveform, LimitX™ adjusts each peak both before and after in proportion to its level so that the peak is controlled in a very musical and natural way. Plus, now you are able to record and edit the dynamics automation!

Snap!™ – Put back the attack! Restore dynamics to your tracks, or samples. Plus, read/write automation of the dynamics!
Put some life back into your mix! Snap!™ restores some of the peak amplitude that is lost when samples are processed and compressed, sometimes taking the life and impact out of them. Or maybe your track just needs more impact. Snap!™ stretches those peaks upward, in a proportional manner. Please be aware that this is the exact opposite of a limiter. Snap!™ will increase your peaks which could result in “overs” or clipping. But when used properly, it can put the musical life back into the sound. And now with the ability to read/write the automation of the dynamics processor, you have the greatest possible control of transients!

BoostX™ – Better than compression. Increases only the quiet sounds! Really! And read/write automation of the dynamics!
BoostX™ using NSLRT™ functions as an intelligent volume control, that allows you to raise the lower levels of your signal without increasing the higher level signals. This is NOT a compressor! But, it provides similar functionality in that the loud parts of the signal are controlled, while the soft parts are brought up. And, it does all of this totally transparently. So, for any vocal or instrumental track that is a little too quiet, and needs to be brought up in the mix, without making it too loud, this is the way to do it! And the new read/write automation of the dynamics gives you the precise control to achieve the sound you want!

CompPlus™ – Amazing compressor with dynamics automation and articulation control! Total dynamics control!
CompPlus™ is unique in that it will read/write compression automation curves! Yes! You can now see and control just how the compressor works by viewing the automation of the actual compression dynamics. Plus, you can control the articulation with automatic gain compensation at the end of words and phrases, in many cases eliminating riding the fader! Yes, CompPlus™ will ride the fader for you, both increasing and decreasing gain as necessary!

DASR™ – De-esser that writes automation! Yes! Now you can have full control of de-essing process!
A de-sser that writes automation, so you can adjust the de-essing to suit your needs, or even write the de-esser automation from scratch and have DASR™ replay it. You have full control over the de-essing process. This gives precise control over the sybilants and plosives since you can view and edit the dip in the dynamics curve to tailor the perfect vocal.

include:

BoostX v3.4.8 – Compressor
CompPlus v2.2.8 – Compressor
DASR v1.4.8 – De-Esser
Dip v1.2.8 – Free Dipper
HiLoPass v1.2.8 – Free EQ
LimitX v5.5.8 – Limiter
PanPlus v1.3.8 – Free Haas Panning
Snap! v3.4.8 – Expander
SpecTrend v1.4.8 – Spectral Trend Analyzer