Ultimate Plexi Bundle
ToneX | 540 KB
This tone model bundle is a collection of tones based off a Marshall SV20C Studio Vintage Plexi tube amplifier. This bundle is a set of captures based off my favorite settings on the amp meticulously captured through 3 different speaker types: Vintage 30s, Greenbacks & a 10” Celestion V-Type.
This bundles tone models model an array of different gain settings. The bundle includes a whopping 30 tone models (amp > mic > mic pre) all at various gain levels and settings through the previously mentioned speakers. The naming convention for the tone presets are, for example, as follows:
JS – Plexi Ult xxxx (GB, V30 or V – High, Nrm or Jmp)
The “V30” signifies Vintage 30 speakers, “GB” signifies Greenback speakers while the “V” signifies a 10” Celestion V-Type speaker. The “High”, “Nrm” & “Jmp” represents which amplifier input was used with Jmp being the “High” and “Low” jumpered together. The “xxxx” in the above naming convention represents the following tone models:
Push 1 – Amp set to as clean as it can be but can still be on the edge of breakup depending in the guitar used.
Push 2 – This is a pushed to breakup amp tone.
Push 3 – This is a higher gain tone model in comparison to Push 2. Often this was captured with the amps volume maxed out on 10.
Lead – This is a higher gain tone model in comparison to Push 3. This features the amp pushed into more saturation with a boost pedal.
The microphones were recorded into a Warm Audio WA-273 Neve style mic-pre/eq.
Feel free to use these captures and presets as starting points to dial in your own tones or use them as dialed in by default.
Please REPORT in Comment Broken Links
